KPtronics Dash 7"
- Product Code: Dash 7
- Availability: Pre-Order
-
400.00€
A 7" touch screen that shows everything you need from the engine on one clean dash. Designed and programmed in Greece by KPtronics. Works with most ECUs on the market and connects to the car with a single CAN cable.
Compatibility
- MegaSquirt MS2 / MS3 (CAN)
- Haltech (CAN)
- MaxxECU (CAN)
- ECUMaster EMU Black (CAN)
- Speeduino (serial)
- Generic OBD-II (CAN) – works with most cars on the factory ECU, 11-bit and 29-bit CAN
You choose the ECU in the dash settings, no firmware change needed.
What it shows
- 5 screen layouts: STREET, RACE, DIAG, LAP and DRAG
- Gauges of your choice (EGT, ignition timing, injector duty, knock, boost target, engine load, EGR and more)
- 40-segment shift light and full-screen flashing SHIFT
- Alarms for coolant, oil temp, oil pressure, fuel pressure, battery and low fuel that stay on until the value is back in range
- Fuel level from the ECU or an analogue sender, with EMPTY/FULL calibration
- Odometer, trip A/B, fuel consumption and service reminders
OBD-II fault code scanner
Read and clear fault codes (DTC) straight from the screen or from your phone. Stored, pending and permanent codes are shown.
Automatic gear indicator
Even if the ECU does not send the gear, the dash works it out from speed and RPM. Calibrate the gear ratios once from your phone and see a big 1–6, N.
Control from your phone
The dash creates its own WiFi (2.4 GHz). From your phone's browser or an Android app you get:
- Live: live values from the ECU
- Logs: download log files
- Update: over-the-air firmware update
- Trip: odometer and trips
- Gear: gear ratio calibration
- Codes: OBD-II fault codes
- Keypad (PRO): the CAN keypad as touch buttons on your phone (emulates a 12-button Blink Marine keypad)
Data logging
Logging to micro SD (FAT32) that starts by itself when the engine is running. Download the files from your phone.
PRO – for track and drag
- GPS lap timer with live delta, lap time, LAST, BEST and lap count (about 0.01–0.02 s accuracy with 10 Hz GPS)
- DRAG screen: 60 ft, 1/8 and 1/4 mile, 0–100, 100–200, trap speed and optional 1 ft rollout
- GPS data in the log and GPS speed for cars without a speed sensor
- 12-key CAN keypad that the ECU sees as a Blink Marine keypad (from the screen and from your phone)
BASIC upgrades to PRO at any time with a code, no firmware change needed.
Specifications
- 7" 800×480 display, 5-point capacitive touch
- ESP32-S3 dual core 240 MHz, 8 MB PSRAM, 8 MB flash
- Connections: CAN bus, UART (serial ECU / GPS), analogue fuel sender input, micro SD, 2.4 GHz WiFi
- 12 V car supply
- Activation per unit, with a code tied to that specific screen
Tags: dash, digital dash, can bus, obd2, ms3, haltech, maxxecu, emu black, speeduino, lap timer, drag, gps, keypad, dtc,
















